Blaupunkt EKP401BE, Owner'S Manual

Page: 8 / 80

6
1. body
2. ON / OFF switch
3. indicator lamp
4. rotating base
5. the lid
6. handle
7. lid opening button
BEFORE FIRST USE
Fill up the kettle with water to max level.
Boil the water according to USING THE ELECTRIC KETTLE chapter.
Pour out the water.
Repeat four times.
To remove possible scent of manufacturing, please boil water few times.
ADVICE: Various deposits (rusty, milky, etc.) may form inside the kettle and float on the water. This is
caused by minerals occurring naturally in the water (like calcium, magnesium, iron). In case of
accumulation of the deposits clean the kettle according to CLEANING AND MAINTENANCE chapter.
USING THE ELECTRIC KETTLE
1. Fill the kettle with water. Make sure that water level is between MIN and MAX marking.
2. The appliance should be placed on the even and heat resistant surface, plugged to the mains.
3. Press ON/OFF switch. Indicator lamp will light.
4. The kettle will automatically switch off when water boils.
5. The kettle can manually be switched off in any time by ON/OFF switch.
ADVICE: Automatic shutdown function may prevent to switch on kettle, if the kettle not cool down.
It is recommended to wait more than 5 minutes before next use.
CLEANING AND MAINTENANCE
Before cleaning, be sure that device is not connected to the mains and it has completely cool down.
For cleaning, use a damp cloth. Do not use any harsh solvents and materials.
Regularly descale the kettle. Use descaling mixture to remove the limestone from the kettle. After
descaling kettle should be rinsed very carefully three times.
Descaling doesn't belong to warranty service.
EKP401BL/EKP401BE