Blaupunkt CR11 Edition, Owner'S Manual

Page: 8 / 54

6
bu = Buzzer
rd = Radio
N1= Birds
N2= River
N3= Wind Chime
N4= Ocean
5. Press SET / ALM SET once again, The WEEKDAYS flash, Press or to select
WEEKDAYS, WEEKENDS or DAILY :-
WEEKDAYS = Alarm 1 is active on Monday to Friday
WEEKENDS = Alarm 1 is active on Saturday and Sunday
DAILY = Alarm 1 is active on Monday to Sunday
6. Press SET / ALM SET again to complete set-up. If no key is pressed in approximate 10
seconds at any time during set-up, the clock will exit the alarm set-up mode.
7. After complete the above alarm setting step (1~6), short press the
ALM 1-2 ON.OFF
button to active or turn off the alarm 1; And the “ ALM 1 WEEKDAYS(example)” icon will
show on display which mean the alarm 1 is working now.
8. To set up the
ALARM2, please press SET / ALM SET button twice, then press and hold SET
/ ALM SET button to start the rest setting which is same operation as ALARM 1. Please do
not forget to press the ALM 1-2 ON.OFF button to active the alarm 2 till the “ ALM 1
WEEKDAYS(example)” icon show on display which mean the alarm 2 is working now.
9. Please kindly note continue press the ALM 1-2 ON.OFF button can make the
alarm1/alarm2 icon disappear or show on display which means the related alarm is on or
off.
Note:
a. the alarm function just operates with power condition when the AC/DC adaptor was
connected , or installed battery backup power . Please double check the alarm setting again
in case you remove the adaptor.
b. In battery power only mode, only buzzer sound is available for alarm sourcing, the unit will
wake up you by buzzer sound even you set the nature sound as the alarm source. If you want
wake up by the radio or nature sound, the AC/DC adaptor should be connected.
Alarm ring up and cancellation
When alarm 1 or 2 is ringing up, the related alarm icon will flash. Press the ALM 1.2/ON.OFF or
MODE/SLEEP once to stop the alarm, and the alarm will ring up again in the time being next
day. After that ALM 1 and WEEKDAYS / WEEKENDS / DAILY and/or ALM 2 and WEEKDAYS /
WEEKENDS / DAILY remain on the display.
Snooze operation (default snooze duration is 5 minutes)
When alarm is ringing up, short press button once to active the snooze function, the
alarm will be silenced and come on again after the set snooze duration.
Note : if your second alarm is activating while the first alarm is ringing up or it is in the snooze
mode, the second alarm will override the first alarm (the first alarm is reset to come on the
next day).
Set up FM antenna
Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip,
alter or attach to other antennas.
Please try to move the radio next to window for better signal reception
CR11 EDITION