Blaupunkt CR11 Edition, Owner'S Manual

Page: 10 / 54

8
5. To turn off the radio before the sleep time has elapsed, press once.
Display dimmer
Simply press to adjust the brightness (Hi/ Lo/ Off ) of the LCD backlight. This can only
be done when the adaptor is being used to power the clock radio and the radio is off.
Remarks : if only use the batteries, press once to activate the backlight for 5 seconds
and then it goes off.
CR11 EDITION
TO USE PROGRAMMABLE AUTO DIM BACKLIGHT
1. At normal time display mode, press and hold , until the display shows and
“
OFF ” flashes. Press or to select “ ON ” to activate the auto dim backlight function.
2. Press once, “ 0:00 ” flash, press or to set auto dim starting hours.
3. Press once, 9 Hr flash, press or to set auto dim duration from 5Hr to 12Hr.
4. Press once to complete the setting. remains on the LCD display. If no key is
pressed in approximate 10 seconds at any time during set-up, the clock radio will revert to
normal time display.
USB charging
Connect the charging cable of your mobile phone to the A-type USB port at the back of the
unit, then connect the other end to your mobile phone. The clock radio will charge the mobile
phone automatically.
Remarks:
1. Make sure the original cable of your mobile phone's original charging cable for charging
2. Make sure the original adaptor enclosed with your clock radio (5V 550mA) is being used to
power your clock radio. Using other adaptors may not charge your phone.
3. The USB port provides slower charging and it takes longer to charge your mobile phone.
4. iPad and notepad charging is not applicable.
5. The charging functions for all phones or electronic devices are not guaranteed on this unit.
6. The charging time of your device is not guarantee due to not supplied rating
chargingUSBpower source for your device.
7. The radio rating USB charging output is 5V/500mA
Trouble shooting
If your clock displays irrelevant time or does not function properly, which maybe caused by
electro-static discharge or other interference, unplug the DC jack to disconnect the AC power
(and remove the backup battery). The clock radio will be reset to default settings and you
need to set it again. For other abnormal issue or malfunction, please contact the service
center for support.