Blaupunkt Como RCM 148, Operating Instructions Manual

Page: 21 / 29

46
For a proper operation of the S-CPS func-
tion there has to be an unrecorded tape
portion of at least three seconds between
the individual titles.
Switching the tape side
(autoreverse)
To change the tape direction during cassette
playback:
•
Press briefly.
At the end of a tape side the mechanism
changes directions automatically to play the
other side (autoreverse). The display shows
“TR 1” for track (side) 1 or “TR 2” for track 2.
Notice:
If there is too much tension on the tape dur-
ing playback, the set may switch over by it-
self before having reached the end of the
tape side. In this case check the condition
of the cassette tape. Sometimes it helps to
rewind it completely.
Tape equalisation
When a metal or CrO
2
tape is inserted, the
tape mechanism automatically adjusts to
metal/CrO
2
tape equalisation.
Scanning cassette titles with
SCAN
You can have the cassette titles played brief-
ly by using the scan function. If you like a
title, stop the scan to continue listening to
that track.
To start/stop the scan function:
•
Press the SC button briefly.
Scan condition: There has to be an unre-
corded tape portion of at least 3 seconds
between the individual titles.
Dolby B NR*
With this unit you can play back tapes re-
corded with Dolby-B NR or without noise
reduction.
Cassette tapes recorded with Dolby NR*
stand out by their reduced tape hiss and the
improved dynamics.
If Dolby-B NR is switched on, “B” will light
up in the display.
To switch on/off:
•
Press / lo.
.
* Noise Reduction system manufactured under licen-
se from Dolby Laboratories Licensing Corporation.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Listening to the radio during
fast tape winding with RM
(Radio Monitor)
When the tape is fast forwarded or rewound
(also with CPS), the radio will normally be
muted. In order to listen to the radio during
fast winding, you can activate the Radio
Monitor function.
For more information please refer to chap-
ter “DSC programming - RM ON/OFF”.
Skipping unrecorded tape por-
tions with Blank Skip
This function senses an unrecorded tape
portion continuing for more than 10 seconds
and automatically fast forwards the cassette
to the beginning of the next track.
Please refer to chapter “DSC programming
- BLS ON/OFF” for more information on how
to use this function.
HH/Melb/Miami gb® 15.05.2002, 13:46 Uhr 46