BR460
22.05.19 17:00
AUTORADIO
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
Bedienungsanleitung
Operating instructions
Mode d’ emploi
Istruzionl of uso
Gebruiksaanwijizing
Bruksanvisining
53
BR460
22.05.19 17:00
21
21
Bluetooth® | External audio sources|
To select the device shown as master telephone,
press the rotary control to open the menu.
Select the "SET AS MASTER" menu item.
Note:
The "SET AS MASTER" menu item is shown only if two cell phones
are simultaneously connected with the car sound system.
Press the rotary control and you are returned to the device list, and
an asterisk symbol ( ) is shown next to the Bluetooth® name
of the device.
To unpair all the cell phones or streaming devices,
select the "DELETE ALL" menu item.
Press the rotary control and the display shows "PLEASE CONFIRM".
Press the rotary control again.
The display briefly shows "EMPTY LIST".
Setting the button function for speed dial
You can select whether the long press of the button directly opens the
phone of the search function for phone book entries or activates voice dialing.
In the Bluetooth® menu, select the "SOFTKEY" menu item.
Press the rotary control to change the setting.
Turn the rotary control to toggle between the settings "SEARCH" (for
search function), "P-BOOK" (for phone book) and "VOICE" (for voice
dial).
Press the rotary control to confirm the setting.
Adjusting the mode for Bluetooth
®
streaming mode
For the music playback, select between Bluetooth® streaming
device or Android cell phone with app control.
In the Bluetooth® menu, select the "BT MUSIC mode" menu item.
Press the rotary control to open the menu.
Turn the rotary control to change between the settings
"STREAMING MODE" (for streaming devices) and "APP MODE"
(for Android cell phones with app control).
Press the rotary control to confirm the setting.
Activating/deactivating combined playback
Prerequisite: The cell phone must be connected with the car sound system
as a streaming device. With the setting ON, navigation announcements
of the connected cell phone are played back simultaneously with the re-
spective active internal audio source of the car sound system (e.g. radio).
In the Bluetooth® menu, select the "BT NAVI MIX" menu item.
Press the rotary control to change the setting.
Turn the rotary control to toggle between the settings ON and OFF.
Press the rotary control to confirm the setting.
Adjusting volume
Only possible with activated combined playback (BT NAVI MIX ON): This
setting allows raising or lowering the level of the navigation announce-
ments to adjust it to the level of the other active audio source. Settings: –5
to +5.
In the Bluetooth® menu, select the "BT NAVI GAIN" menu item.
Press the rotary control to change the setting.
Turn the rotary control to set the level adjustment.
Press the rotary control to confirm the setting.
External audio sources
Front AUX-IN socket
Danger!
Increased risk of injury from connector.
In case of an accident, the protruding connector in the front AUX-IN socket
may cause injuries. The use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, it is recommended to use angledjack plugs.
As soon as an external audio source, such as a portable MP3 player is
connected to the front AUX-IN socket;, it can be selected with the
SRC
button.”AUX” then appears on the display.
ENGLISH
22
BR460
22.05.19 17:00
22
Sound settings
Sound settings
The following sound settings can be changed inthe "AUDIO" menu:
•
Adjusting bass and treble
•
Setting the left/right volume distribution (Balance) or front/rear
(Fader)
•
Adjusting the increase of bass at low volume (Loudness)
•
Selecting a sound profile
•
Selecting level and frequency of the preamplifier output(Sub-Out).
•
Adjusting the time delay for switching in an external amplifier.
•
Setting the 3-band equaliser
Calling and exiting the "AUDIO"
menu
Breifly press the
MENU
button to exit the menu.
Breifly press the
MENU
button to open the user menu.
Turn the rotary control until the "AUDIO" menu item is selected.
Press the rotary control to open the "AUDIO" menu.
Turn the rotary control until the desired menu item is selected.
Perform the setting (see the next section).
Notes:
•
The menu is automatically exited approx. 15 seconds after the
last button activation and you are returned to the display of the
current audio source.
•
To go back to the next higher-level menu, turn the rotary control
until the "<<<" option is selected and press the rotary control.
Making settings in the "AUDIO" menu
BASS
Bass level. Settings: –7 to +7.
Rotary bass control to change the setting until the desired level is
set.
TREBLE
Bass level. Settings: –7 to +7.
Rotary treble control to change the setting until the desired level is
set.
BALANCE
Left/right BALANCE distribution. Settings: L9 (left) to R9(right).
Rotary balance control to change the setting until the desired volume
distribution is set.
FADER
Front/Rear FADER distribution. Settings: F9 (front
）
to R9(rear).
LOUDNESS
Increase of bass at low volume. Settings: ON, OFF.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to confirm the setting.
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to confirm the setting.
PRESET EQ (sound profile)
Selecting equalizer presettings. Settings: POP, ROCK, CLAS (classic), OFF (no
presetting).
Press the rotary control to change the setting.
Turn the rotary control to change between the settings.
Press the rotary control to confirm the setting.
SUB-OUT
Setting the level and frequency of the preamplier output.
Press the rotary control to open the menu.
Turn the rotary control to change between the following menu items:
– FREQUENCY (settings: 80/120/160 Hz)
– GAIN (settings: 0 to +7)
ENGLISH
