24
If the set was still in operation, it will turn off
now. All current settings remain stored. If a
cassette or CD is inserted, it will be kept in
the set.
The radio will turn on automatically when you
attach the release panel again.
Attaching the release panel
Slide the panel (B) from the left to the guide
of the chassis (A). Gently push the left side
of the panel against the front of the chassis
until it snaps into place.
Release panel
Theft protection
This unit is equipped with a detachable con-
trol panel. A car radio without control panel
is worthless for thieves.
Protect your car radio and detach the con-
trol panel when you leave your car. It is very
easy to attach and detach the release pan-
el thanks to its specific design.
Note:
Do not pull the release panel straight out
from the chassis, but detach it as illustrated
below. Be sure not to drop the panel.
Do not expose the release panel to direct
sunlight or other heat sources.
Do not leave it in a humid place.
Detaching the release panel
Press the REL button to release the control
panel. Then pull it off gently as illustrated.
Clock
This car radio is equipped with a built-in
clock.
Display priority:
To switch the display priority, press the
button until you hear a beep. Press as many
times until the desired display mode is ac-
tive (not during radio reception).
Radio mode
Press the
button briefly to display the
clock.
Cassette mode
Press this button to switch the display be-
tween the cassette direction and clock indi-
cation.
Setting the clock
•
Press DSC briefly.
•
Press / to selection the “CLOCK-
SET” function.
•
Press << >> to set the hours or min-
utes. The adjustable option will flash in
the display.
•
Press / to adjust the flashing value.
•
After you have set the clock, press
DSC briefly to store the new setting.
Dresden,Boston RCR128 gb®
02.05.2002, 11:04 Uhr
24
Summary of Contents for Boston RCR 128
Page 1: ...8 ...
