27
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
To select a scanned station and switch
off the Scan function:
•
Press SRC/SC.
If no station is selected, scan will start again.
Selecting the automatic tuning
sensitivity
You can alter the automatic tuning sensitiv-
ity.
If “lo” is displayed, the radio will only pick up
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also
pick up weaker, more distant stations (high
sensitivity).
If you would like to alter the sensitivity level
please refer to the section on “DSC program-
ming – SENS”.
PTY - Programme Type
PTY is an RDS service offered by an in-
creasing number of broadcasting stations.
This feature allows you to select FM stations
according to their programme type.
After you have chosen the PTY of your pref-
erence, the corresponding stations can be
selected either by seek tuning or using the
scan function.
•
Select the appropriate waveband by
pressing BA/TS.
•
Tune in a station with the rocker switch
(either automatically / or manually
<< >>).
•
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, con-
firmed by a beep).
Now the station has been stored.
The display will indicate which preset but-
ton is currently activated.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations in your current recep-
tion area sorted according to their signal
strength. This function is particularly conven-
ient on longer trips.
•
Press the BA/TS button for 2 seconds.
“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the strongest
station.
If desired, stations can also be stored man-
ually in the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
•
Select the waveband by pressing
BA/TS. For FM, also choose the corre-
sponding memory bank by pressing
the BA/TS button as many times as
necessary until the desired bank ap-
pears in the display.
•
Press the corresponding preset button
briefly to recall the station.
Scanning stations with
Radio Scan
You can scan through all of the stations in
your reception area.
To start the Scan function:
•
Press SRC/SC longer.
The scanned frequency or the station name
will start flashing in the display.
During the actual scanning process “SCAN”
will appear in the display.
Dresden,Boston RCR128 gb®
02.05.2002, 11:04 Uhr
27
Summary of Contents for Boston RCR 128
Page 1: ...8 ...
