349
Appendix
Supported iPod/iPhone devices
Our product can support below listed iPod/iPhone gen-
erations:
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod classic
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPhone 4s
• iPhone 4
• iPhone 3GS
"Made for iPod" and "Made for iPhone" mean that an elec-
tronic accessory has been designed to connect specifi-
cally to iPod, iPhone respectively, and has been certified
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod,
iPhone may affect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in
the U.S. and other countries.
DivX®, DivX Certified® and associated logos are trade-
marks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
This DivX Certified® device has passed rigorous testing to
ensure it plays DivX® video.
To play purchased DivX movies, first register your device
at vod.divx.com. Find your registration code in the DivX
VOD section of your device setup menu.
DivX Certified® devices have been tested for high-quality
DivX® (.divx, .avi) video playback. When you see the DivX
logo, you know you have the freedom to play your favorite
DivX movies. DivX video can include advanced playback
features such as multiple subtitle and audio tracks. Enjoy
your favorite videos—from content you create to videos
you discover online—with DivX Certified devices.
Windows® und Windows Media® are registered trade-
marks of the Microsoft Corporation in the U.S.A. and/or
other countries.
This product is protected by certain intellectual property
rights of Microsoft. Use or distribution of such technolo-
gy outside of this product is prohibited without a license
from Microsoft.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
The Parrot trademarks and logo are registered trade-
marks of Parrot S.A.
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in-
cluding interference that may cause undesired operation.
2. Changes or modifi
cations not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of
20 centimeters between the radiator and your body.
Industry Canada Statement
English: This device complies with Industry Canada
licence exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause un-
desired operation of the device.
Français :
Le présent appareil est conforme aux CNR d'In-
dustrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
© 2014 All rights reserved by Blaupunkt. This material may
be reproduced, copied or distributed for personal use only.
15_Philadelphia845_ro.indd 349
11.09.14 11:17
25
ENGLISH
Controls – Device
1
RADIO
button
Start radio mode
In radio mode: Select waveband/memory bank
2
PHONE
button
Starting Bluetooth mode
In telephone mode: Call up menu of last source
3
NAVI
button
Call up navigation
In navigation mode: Call up menu of active source
4
SRC
button
Short press: Select source
Long press: Call up main menu
5
Left rotary/pushbutton
Short press: Switch on device
In operation: Mute audio source
device
Turn: Adjust volume
6
Right rotary/pushbutton
Turn: Navigate in menus/lists and change settings;
lm
Short press: Call up selected menu entries and con-
rm settings; start and interrupt playback
Long press: Change to next higher menu level
7
SETUP
button
Call up/exit settings menu
8
microSD card reader for navigation data
Access only with open cover
9
Cover
:
Front AV-IN socket (source AV-IN 1)
Access only with open cover
;
SD card reader
Access only with open cover
<
Front USB socket (source USB 1)
Access only with open cover
=
Reset button
Restoring the original factory settings of the device.
Caution! All personal settings will be lost!
>
button (Eject)
Eject a DVD/CD
?
DVD/CD drive
@
Touchscreen user interface
A
Infrared receiver for remote control
B
Microphone
1
2
5
3
4
6
7
8
9
15
17
18
13
14
16
10
12
11
02_Philadelphia845_gb.indd 25
27.08.14 14:10
13
PhoneLink Sound settings
USB cable or vehicle USB interface, or re-
insert USB wire or restart Android phone and
retry).
After connection, operate according to the
screen software.
Tip:
• For your driving safety, please do not use the
function during driving.
• For normal use, Android 4.0 to Android 6.0
version is recommended. Since Android 2.3X
and below version system lacks relevant
support, when using the version system to
connect the product, some functions (such
as: mobile video play, etc.) may not display
normally.
• According to the different mobile phone”
Media library” and “Video” program support
formats, it is not all the video files copied to
mobile phone can be identified and played.
According to the different equipment function,
not all video files of all formats can be played in
vehicle terminal smoothly.
• S i n c e t h e m o b i l e p h o n e d a t a c a b l e
performance difference in the market, it is
strongly recommended using the original USB
data line to connect so as to guarantee the
connection stability.
• Due to the difference of mobile phone
performance, when using different mobile
phones to connect, the performance may be
different.
Connect with iPhone
Select “Phone Link” in the main menu and
select “iPhone WiFi” on the screen.
Turn on the WiFi and Personal Hotspot on the
settings menu of your iPhone.
Select the hotspot name of your iPhone on
the list of the screen and enter the password.
Open the control center of your iPhone and
touch [AirPlay].
Select
[EC-Mirror-sW]
, and turn on the
“Mirroring”
function.
After connecting successfully, the desktop of
you iPhone will display on the screen of the
unit.
If it is not connected successfully, please restart
the WiFi of your iPhone, and refresh the hotspot
list on the unit.
Sound settings
Volume distribution (fader/balance)
You can adjust the volume distribution in the
vehicle for all sources.
On the control bar of the current audio source,
press the [
] button.
The equalizer menu is displayed.
Press the [
] button.
The menu for fader and balance is displayed.
Adjust fader and balance with [ ]/[ ] or
[ ]/[ ].
Next, press [ ] . The setting is stored, the
current source is displayed again.
Equalizer
You can adjust the equalizer for all sources.
On the control bar of the current audio source,
press the [
] button.
The equalizer menu is displayed.
Select a preset equalizer via the buttons.
- Or -
Press the
[ User ]
button to adjust the level of
the available frequency bands according to
your prefer-ences.
Note:
With the
[ Reset ]
button, you can reset the
custom-ised setting again.
- Or -
Press the
[ Flat ]
button for a linear sound
playback.
Press the
[ Loud ]
button to switch increasing
the bass at low volume on or off .
Next, press [ ] . The setting is stored, the
current source is displayed again.
