BAP-HA-P0809-N29W
13
slowly. This means the device is ready for configuration in AP Mode.
●
mobile phone and select the Wi-
to it.
●
●
and your device will be listed in your app.
You can now control your smart device via your mobile phone app at anytime and anywhere
(make sure your mobile phone and smart device are both connected to the network). You can
share your devices with your friends and family after your devices have been added
successfully.
4.
FAQ
(1)
ce?
a
Make sure the device is powered on and close to your mobile phone when adding the
device.
b
Make sure your mobile phone is connected to the Wi-Fi network and that your Wi-Fi
router is working properly.
c
Make sure the device is ready for configuration. Ple
d
Make sure the number of connected devices have not reached the maximum number
supported by the Wi-Fi router. If so, please disconnect some devices from the network.
e
Make sure the Wi-Fi password is correct when adding the new device.
f
Make sure you have not used any Chinese characters when naming your Wi-Fi network.
(2)
Can I control devices over a 2G/3G/4G/5G network?
