E-1
ENGLISH
FRANÇAIS
ESP
AÑOL
POR
TUGUÊS
Locking screw
This equipment has been tested and found to comply with
the limits for a Class B device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable pro-
tection aga hinst harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio
frequency energy, and, if not installed and used in accordance
with instructions, may cause harmful interference with radio
communications. However, there is no guarantee that radio
interference will not occur in particular installation. If this equip-
ment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to consult the dealer or an
experienced radio/TV technician for help.
You are cautioned that any changes or modifications not ex-
pressly approved in this manual could void your authority to
operate this equipment.
Features
• Detachable Flip Down Front Panel
• Built-in Power Amplifier
(max. output : 50W
×
4ch)
• 4-ch F & R Preamp Output
• 2-ch Subwoofer Preamp Output
• FM/AM PLL Synthesizer Tuner
• 30 Station Preset Memory
• Travel Store / Scan Tuning
• X-Bass System
• Station Name, Disc Name Store / Station Call
• Auxiliary-input
• Optional IR Remote Control
• CD Changer Control
(IDCA09, CDCA08 & CDCA071*)
* CDCA071 requires adaptor # 7607 898 093 available
separately.
• Avoid installing the unit where it would be subject to high
temperatures, such as in direct sunlight or a hot air stream
from the heater, or where it would be subject to dust, dirt, or
excessive vibration.
• Do not turn on the unit if the temperature inside the car is
very high. Always cool down the unit before usage. Parking
your car in direct sunlight will result in a temperature rise.
• If the unit does not turn on, check the connections first. Then
check whether the fuse at the back of the unit is blown.
• Carefully read this manual before using the unit. If you en-
counter any problems that are not covered in this manual,
please consult the dealer where you purchased the unit or
the dealer nearest to you.
• This unit has been designed specifically for playback of
compact discs bearing the
mark. Other discs cannot
be played.
• Do not use non-conventional discs such as heart-shaped,
octagonal discs, etc. The player could be dameged.
Handling Compact Discs
• Be careful when removing a compact disc after the play-
back is completed because the disc may be extremely hot.
• Do not use non-conventional discs such as heart-shaped,
octagonal discs, etc. The player could be damaged.
• Do not expose compact discs to direct sunlight or any heat
source.
• Check all compact discs before playing, and discard cracked,
scratched or warped discs.
• Wipe dirty or damp discs outward from the centre with a
soft cloth.
• Do not use any solvents such as commercially available
cleaners, antistatic spray, or thinner to clean the compact
discs.
Attaching the Front Panel
Place the right hand side of the front panel so that the parts
A
of the front panel are engaged with the parts
B
of the unit
as shown below. Then push the left hand side of the front
panel until it is securely locked.
Front Panel Open / Close
Panel open
Panel close
Press the
OPEN
.
Raise the front panel with your
finger until it locks in place.
Security / Retailer Display
Bolt the front panel with the locking screw (See page 10) in
the inner cover as shown below, to protect the front panel
from robbery and from getting lost.
FCC WARNING
Precautions
Handling the Front Panel
AUSTIN CD41
01.3.22, 1:45 PM
1