Atlanta RD 105
36
Enter/display CD names
This function allows you to name as many as
30 discs. Each time the corresponding disc is
inserted, the specified name will be shown in
the display (e.g. VIVALDI).
To start the entry:
•
Press the DSC button.
“CD NAME” is displayed.
•
Press the rocker switch << >>.
If no disc is inserted, the system will
display “LOAD CD”.
•
Insert a disc.
The first underscore character is flashing.
•
Now use the / button to select a cha-
racter.
The display will show one after another the
capital letters (A-Z), the umlauts, the special
characters, and the numbers (0-9).
•
Use the / button to move to the next
character and make a selection.
It is possible to specify a total of 8 different
characters.
To finish your entry:
Press the -dB button to store the entry and
then either the DSC button to quit the DSC
mode, or EJECT to name the next disc.
An old name can be deleted by overwriting it
with a new one.
b) Clearing the TPM memory for a CD
•
Insert the corresponding disc.
•
Switch on TPM.
•
Press the CLR button for approxi-
mately 8 seconds until “CLR CD” is
shown in the display.
The TPM memory for this disc is clea-
red.
c) Clearing the TPM memory for all CDs
•
Insert the corresponding disc.
•
Switch on TPM.
•
Press the CLR button for approxi-
mately 14 seconds until “CLR TPM”
is shown in the display.
The TPM memory for all discs is clea-
red.
Sampling tracks automatically
with CD SCAN
This function allows you to sample all CD
tracks one after another.
To activate the scan function,
•
press the PS button for about
2 seconds (BEEP).
The display shows “CD SCAN”.
The following tracks will be scanned one after
another.
If “TPM” is activated, the set will only sample
the tracks stored in the TPM memory.
To continue listening to the sampled track,
•
press the PS button once again. The
set will then continue to play the track
currently being sampled.
See also chapter “DSC programming -
SCANTIME”.
The Mix function
When the Mix function is activated, the CD
tracks will be played at random. The display
will then show “MIX”.
If “TPM” is activated, the set will only play the
tracks stored in the TPM memory. To skip a
title, press button .
Press the MIX button to switch “Mix” on and
off.
