background image

40

Radio Operation

This device is equipped with an RDS radio
receiver. Many of the FM stations that can be
received transmit a signal in addition to the
program itself that contains information such
as the name of the station and the type of
program (PTY).
As soon as it can be received, the name of
the station is shown in the display . If desired,
the program type can be displayed.
You may read more about this in the section
on “Program Type (PTY)”.

Switching on radio operation

If the radio is in one of the other operating
modes

Press the TUNE button, 

>

.

RDS convenience function (AF,
REG)

The RDS convenience functions AF (alternat-
ive frequency) and REG (regional) extend the
capabilities of your radio (only in FM radio
operation).

AF: If the RDS convenience function
has been activated, the device searches
automatically in the background for the
best frequency on which the set station
can be received.

REG: Some stations divide their pro-
grams at certain times into regional pro-
grams with different content. The REG
function prevents the car radio from
switching to alternative frequencies that
have a different regional program con-
tent.

Note:
REG must be separately activated or deactiv-
ated in the radio function menu.

Switching the RDS convenience function
on and off

In order to use the RDS convenience func-
tions AF and REG

press the TUNE button, 

>

, when the

radio is operating.

The radio function menu is shown on the dis-
play.

Press the softkey, 

4

, indicating “RDS”.

The RDS convenience functions are active if
“RDS” is displayed with light and shade re-
versed. “REG ON” or “REG OFF” is displayed
briefly when the RDS convenience functions
are switched on or off.

To return to the basic radio menu

press the TUNE button, 

>

, or wait for

eight seconds. The settings are then
saved.

Switching REG on and off

In order to use the RDS convenience func-
tion REG

press the TUNE button, 

>

, when the

radio is operating.

The radio function menu is shown on the dis-
play.

Press the softkey, 

4

, indicating “REG”.

“REG ON” or “REG OFF”  is displayed briefly
when the REG function is switched on or off.

To return to the basic radio menu

press the TUNE button, 

>

, or wait for

eight seconds. The settings are then
saved.

RADIO OPERATION

Summary of Contents for Arizona DJ70































Reviews: