EN
15
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
1 ECO
Eco programme is suitable to clean normally soiled tableware, that
for this use, it is the most efficient programme in terms of its combined
energy and water consumption, and that it is used to assess complian-
ce with the EU Ecodesign legislation.
2 INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
3 MIXED
Mixed soil. For normally soiled dishes with dried food residues.
4 RAPID 30’
Program to be used for half load of lightly-soiled dishes with no dried
food residues. Does not have drying phase.
5 SANITIZING
Normally or heavily soiled crockery, with additional antibacterial wash.
Can be used to perform maintenance of the dishwasher.
6 SOAK
Use to refresh crockery planned to be washed later. No detergent
to be used with this program.
Notes:
Please note that cycle
Rapid 30’
is dedicated for lightly soiled dishes.
OPTIONS can be selected directly by pressing the corresponding button
(see CONTROL PANEL)
.
If an option is not compatible with the selected program
see PROGRAMS TABLE
, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
ActiveDry
ActiveDry
is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying per-
formance every day. Door opens at the temperature that is safe to your
kitchen furniture.
As additional steam protection, special designed protection foil is added
together with the dishwasher. To see how to mount protection foil
please refer to
(INSTALLATION GUIDE)
.
ActiveDry
functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding
P
button (6 sec).
2. You switched to
ActiveDry
Control Menu, you could change status
of
ActiveDry
functionality by pressing
P
button:
E
– enabled
d
– disabled
To confirm the change and exit from the Control Menu please press
and hold
P
button (3 sec).
TABLET (Tab)
This setting allows you to optimize the performance
of the program according to the type of detergent used.
Press the
START/PAUSE
button for 3 seconds (the corresponding
symbol will light up) if you use combined detergents in ta-
blet form (rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should
be off.
DELAY
The start time of the program may be delayed for a period
of time between
1
and
12
hours.
1. Press the DELAY button: the corresponding «
h
» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start
of the selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE button
and within 4 seconds close the door: the timer will begin
counting down.
3. Once this time has elapsed, the indicator light «
h
» switches
off and the wash cycle begins.
To adjust the delay time and select a shorter period
of time, press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light «
h
»
switches off. The wash program will start automatically as soon
as the door is shut.
The DELAY function cannot be set once a wash cycle has
been started.
HALF LOAD
If there are not many dishes to be washed, a half load cycle may
be used in order to save water, electricity and detergent. Select
the program and press the HALF LOAD button: the indicator
light will light up. Press the HALF LOAD button to deselect
this option.
Remember to halve the amount of detergent.
OPTIONS AND FUNCTIONS
