Blaupunkt 5RH84352, Instruction Manual, Page: 29 / 44

Time-setting options
en
29
O
Time-setting options
Time-setting options
There are 2 different time-setting options:
■
A hotplate should switch off automatically
■
Kitchen timer
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
1.
Selecting the heat setting
2.
Touch the
r
symbol. The
x
indicator for the
required hotplate lights up.
‹‹
lights up on the timer
display.
3.
Within the next 10 seconds slide your finger along
the control panel repeatedly until the required
cooking time is reached.
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cooking
time of the hotplate selected is always displayed.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
‹‹
lights up in the display for 10 seconds. The
x
display
lights up brightly. Touch any symbol. The displays go
out and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
r
symbol. The
x
indicator lights up brightly. Change the cooking time
or set to
‹‹
on the control panel.
Notes
■
The faster you slide your finger over the settings
range, the faster the minutes display counts forwards
or back. By tapping your finger, you stop the display
immediately.
■
You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.
~
Page 30
Note:
You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates:
Select the hotplate and touch the
r
symbol. On the
control panel change the cooking time or set to
‹‹
.
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch on the kitchen timer in 2 different ways:
■
If a hotplate has been selected, touch the
r
symbol
twice within 10 seconds.
■
If a hotplate has not been selected, touch the
r
symbol.
The
V
indicator lights up.
Setting the kitchen timer
Set the required time on the control panel.
When the time has elapsed
After the time has elapsed, you will hear a beep.
‹‹
lights up in the timer display. The
V
indicator for the
kitchen timer lights up brightly. The indicator switches
off after 10 seconds.
Displaying the time
Use the
r
symbol to select the kitchen timer. The time
is displayed for 10 seconds.
Changing the time
Use the
r
symbol to select the kitchen timer and reset
the time.
b
Automatic safety cut-out
Automatic safety cut-out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
”‰
and the
•
/
œ
residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
[