Blaupunkt 5II.4 Series, Instruction Manual

Page: 15 / 24

PowerBoost function
en
15
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
‹‹
for 10 seconds in
the display.
When the
0 symbol is pressed, the indications turn off
and the beeping stops.
Notes
■
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■
You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1.
Touch the
0
symbol repeatedly until the
V
indicator lights up.
‹‹
lights up on the timer display.
2.
Touch the
@
or
A
symbol. The basic setting appears.
@
symbol: 10 minutes.
A
symbol: 5 minutes.
3.
Use the
@
or
A
symbol to set the required time.
After a few seconds, the time begins to count down.
Changing or cancelling the cooking time
Touch the 0 symbol repeatedly until the V indicator
lights up. Change or set the time to ‹‹ using the @ or
A
symbol.
Once the time has elapsed
A warning signal sounds. ‹‹ is displayed on the time
program function display. After 10 seconds the
indicators turn off.
When the
0
symbol is pressed, the indicators turn off
and the beeping stops.
v
PowerBoost function
PowerBoost function
The PowerBoost function enables you to heat up large
quantities of water faster than when using heat setting
Š
.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration). Otherwise, › and Š will flash in
the display for the selected hotplate; the Š heat setting
will then be set automatically without activating the
function.
Note:
In the combi zone, the PowerBoost function can
only be activated if the two hotplates are used
independently of each other.
Activate
1.
Select the hotplate.
2.
Touch the
Õ
symbol.
The
›
indicator lights up.
The function has now been activated.
Deactivating
1.
Select the hotplate.
2.
Touch the
Õ
symbol.
The
›
display goes out and the hotplate switches
back to the
Š
heat setting.
The function is deactivated.
Note:
In certain circumstances, the PowerBoost
function can switch itself off automatically in order to
protect the electronic elements inside the hob.