Blaupunkt 368417 Owner'S Manual Download Page 2

1

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT:
PLEASE READ ALL OF THE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE.

•  When using electrical products, basic safety precautions should always be followed.

•  Check that the voltage indicated on the rating plate corresponds with that of the local network before  

  connecting the product to the mains power supply.

•  Children younger than 3 years old should be kept away from the product unless continuously   

 

  supervised.

•  Children aged from 3 years and less than 8 years should not plug in, regulate or clean the product or    

  perform user maintenance.

•  Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of  

  experience and knowledge can use this appliance, only if it has been placed in its intended operating   

  position and they have been given supervision or instruction concerning use of the appliance in a safe  

  way and understand the hazards involved.

•  Children should not perform cleaning or user maintenance unless they are older than 8 years and  

 

  supervised. 

•  This is not a toy – children should be supervised to ensure they do not play with the product.

•  Always unplug the product and allow to cool fully after use and before any cleaning or maintenance.

•  Normal voltage is still present in this product as long as the product is connected to the electrical  

 

 source.

•  This product contains no user serviceable parts. If the power supply cord, plug or any part of the  

 

  product is malfunctioning or if it has been dropped or damaged, only a qualified electrician should    

  carry out repairs. Improper repairs may place the user at risk of harm. 

•  Keep the product and its power supply cord out of the reach of children and away from heat or sharp   

  edges that could cause damage. This includes any parts of the product that may become hot during    

  use and other heat emitting products.

•  Keep the power supply cord away from any parts of the product that may become hot during use.

•  Keep hands, fingers, hair and any loose clothing away from the rotating parts of the product.�Do not    

  immerse the product in water or any other liquid.

•  Do not operate the product with wet hands.

•  Do not leave the product unattended whilst connected to the power supply or when in use.

•  Do not remove the product from the power supply by pulling the cord; switch it off and remove the    

  plug by hand.

•  Do not use this product for extended periods of time.

•  Do not leave the product plugged in or operating overnight.

•  Do not use the product for anything other than its intended use.

•  Do not use this product outdoors.

•  Do not move the product whilst it is in use.

•  Do not shake the product.

•  Do not cover the product.

•  Do not put objects into any of the openings.

•  Do not clean the product with abrasive chemicals or materials such as scourers, as they may damage    

  the product. This includes insecticide and chemical solvents.

•  Always use the product on a flat, stable surface.

•  Use of an extension cord with the product is not recommended.

•  This product should not be operated by means of an external timer or separate remote control system,  

  other than that supplied with this product.

•  This product is intended for domestic use only. It should not be used for commercial purposes.

•  This product should only be used with the power supply unit provided.

Summary of Contents for 368417













Reviews: