4
Stud wall installation
3 - Mounting the TV onto the wall plate
STEP-2
Insert the two plastic covers on both sides of the
wall plate.
Wall plastic cover
Use an electronic stud finder to identify and mark the location of
one interior wall stud. Use the wall plate as a template and use a
spirit level to ensure the wall plate is level.
Mark the 4 locations for the bolts. Pre-drill these holes
with a drill bit to at least 50mm deep. Next mount the
wall plate to the wall using
self tap screws(A) and flat washer(E).
The width of the wall stud needs to be 2.5" or above.
A
E
Wood stud
Adjusting the TV display
The TV can be adjusted to desired position using
the tilt and swivel actions.
Hook the TV plate onto the top of the wall plate first. Then slowly lower the bottom of the TV until
the TV plate fits the wall plate completely. Finally, tighten fasten screws(L) on the left and right
side of TV plate.
STEP-1
STEP-2
Knob
Wall
TV
+5°
-15
°
-20°
+20°
TV
Wall
Wall
Bolt
Cable management
Use the holes to neatly position cables.
STEP-3
TV
Cable
