3
INSTALLATION
Installing a Blaupunkt TV Wall Mount is as easy as putting up a shelf. Easy to
follow installation instructions are included with each product.
As easy as 1-2-3
Most Blaupunkt TV brackets come pre-assembled so installation is simple.
1 - Attaching the TV brackets to the TV
(Always start with the TV. If there is a compatibility issue at this point, you
have not drilled the wall.)
Please loosen the two bolts on the left and
right sides of the TV plate in order to separate
the wall and TV plate.
Bolt
STEP-1
Refer to your TV manual to determine the diameter of the screw, spacer
and washer necessary for the size, height and position of the holes on
your TV. Attach the TV plate to the back of the TV with the hooks facing
down. Use selected componets as below to attach TV and once aligned
tightly secure the bolts. Install the spacers(D) between the TV and the TV
plate. And then use screw(F/G/H/I/J/K/L/M), square washer(C) to attach TV
plate and TV together.
F/G/H/I/J/K/L/M
TV
D
C
STEP-2
Mount wall plate on wall
Using the wall plate as a template and using a spirit
level to ensure the wall plate is level. Mark 4 locations
for the
self tap screws. Drill the holes with a 10mm drill bit
at least 50mm deep into the wall and insert 4 wall anchors
(B) into the holes. Next mount the wall plate to the wall
using the
self tap screws(A) and flat washer(E).
Brick/concrete/stone
B
E
STEP-1
2 - Solid Wall Installation
