background image

38

MANUFACTURER'S WARRANTY 

The fan complies with the requirements according to the EU norms and 
directives, to the relevant EU-Low Voltage Equipment Directives, 
EU-Directives on Electromagnetic Compatibility. 
We hereby declare that the following product complies with the essential 
protection requirements of Electromagnetic Council Directive 2004/108/EC, 
89/336/EEC and Low Voltage Directive 2006/95/EC, 73/23/EEC and 
CE-marking Directive 93/68/EEC on the approximation of the laws of the 
Member States relating to electromagnetic compatibility. 
This certificate is issued following test carried out on samples of the product 
referred to above. Assessment of compliance of the product with the 
requirements relating to electromagnetic compatibility was based on the 
following standards.
Protection degree index according to IP rating against access to hazardous 
parts and water ingress is  IP 45 for Sileo 100, Sileo 125, Sileo 150 and 
IP X5 for Sileo Max 150 model. The fan is double insulated and does not 
require grounding. 
The warranty operation period (service life) of the fan is five years from the 
retail sale date provided observance of the installation and operation 
regulations.
In case of the product malfunctions caused by a manufacturing fault 
during the warranty period the consumer is entitled for the fan replacement 
or its warranty repair. 

WARNING!!! 
In case of a claim for the product replacement  please submit the operation 
manual with the sales confirmation and/or a payment document that 
confirms the product sales. If case of no confirmation of the sale date, 
the warranty term shall be calculated from the manufacturing date.

By purchasing this product the user confirms to have read and 
accepted the operation manual conditions as well as operation, 
storage, transportation, mounting, setup, wiring, servicing, repair 
and warranty rules applicable to the product stated in the attached 
technical documentation. 

Do not dispose in domestic waste. The product contains in part material 
that can be recycled and in part substances that should not end up as 
domestic waste. Dispose of the product once it has reached the end 
of its working life according to the regulations valid where you are.

Summary of Contents for Sileo





















Reviews: