www.blaubergventilatoren.de
9
Komfort ERV EC DB S14
THE UNIT MUST BE MOUNTED BY A QUALIFIED EXPERT ONLY, PROPERLY TRAINED AND
HAVING THE REQUIRED TOOLS AND MATERIALS.
HUMIDITY SENSOR MOUNTING
The humidity sensor is not included into delivery set and is available as a specially ordered accessory.
The humidity sensor must be installed prior to unit mounting. Mounting steps:
•
Remove the fastening screws on the service panel and remove it.
•
Insert the humidity sensor in the mount on the inner casing wall close to the extract spigot and connect the humidity sensor contact socket to
the respective contact socket on the control unit, refer to the External wiring diagram.
•
Install the service panel back.
UNIT MOUNTING
The unit is designed for suspended ceiling mounting by means of the threaded rods, nuts and vibration absorbing rubber.
The fasteners are not included in the delivery set and are available as specially ordered accessories.
While selecting fastener type consider the mounting surface material and the ventilation unit weight. For details please refer to the technical data of
the unit.
The fasteners must be selected by a professional!
Prior to the installation check the unit casing for any left-over foreign objects such as plastic film or paper.
While mounting the unit make sure to provide sufficient service access to the unit for maintenance and repair operations.
Keep the minimum distance between the unit and the ceiling 20 mm.
To attain the best performance of the unit and to minimise turbulence-induced air pressure losses connect a straight air duct section on both sides of
the unit.
Minimum straight air duct length:
•
equal to 1 air duct diameter on intake side.
•
equal to 3 air duct diameters on outlet side.
If the air ducts are not connected or the connected air ducts are too short, protect the unit parts from ingress of foreign objects.
Cover the spigots with a protecting grille or other protecting device with mesh width not more than 12.5 mm to prevent uncontrollable access to the
fans.
MOUNTING AND SET-UP
