manualshive.com logo in svg

BLAUBERG KOMFORT EC LB S11, Operation Manual

Share
Download
BLAUBERG KOMFORT EC LB S11 Operation Manual Download Page 25

25

www.blaubergventilatoren.de

KOMFORT EC LB/LBE S11

The air handling unit with heat recovery

KOMFORT EC LB300 S11

KOMFORT EC LBE300-3 S11
KOMFORT EC LB400 S11

    

KOMFORT EC LBE400-3 S11
KOMFORT EC LB600 S11
KOMFORT EC LBE600-3 S11

is recognized as serviceable.

The unit complies with the requirements according to the EU norms and directives, to the relevant EU-Low Voltage Equipment Directives, EU-Directives 

on Electromagnetic Compatibility. We hereby declare that the unit complies with the essential protection requirements of Electromagnetic Council Directive 

2004/108/EC, 89/336/EEC and Low Voltage Directive 2006/95/EC, 73/23/EEC and CE-marking Directive 93/68/EEC on the approximation of the laws of the 

Member States relating to electromagnetic compatibility, which relate to electrical appliances used in set voltage classes.

This certificate is issued following test carried out on samples of the product referred to above.

Approval mark 

 

 

Manufacturing date ____________________

Company:                                                                                                                                                                                                                                                                                                   

Expert’s Full Name                                                                                                                                                                                                                                                                                                  

Date                                                                                                              Signature                                            

Heat recovery air handling unit

KOMFORT EC LB300 S11

KOMFORT EC LBE300-3 S11
KOMFORT EC LB400 S11

KOMFORT EC LBE400-3 S11
KOMFORT EC LB600 S11
KOMFORT EC LBE600-3 S11

 

is connected to power mains in compliance with the operation manual requirements by the professional:

SELLER

PURCHASE DATE

REPRESENTATIVE IN EU  
BLAUBERG Ventilatoren GmbH

Aidenbachstr. 52a,

D-81379 München, 

Deutschland

ACCEPTANCE CERTIFICATE

CONNECTION CERTIFICATE

WARRANTY CARD

KOMFORT EC LB300 S11

KOMFORT EC LBE300-3 S11
KOMFORT EC LB400 S11

KOMFORT EC LBE400-3 S11
KOMFORT EC LB600 S11
KOMFORT EC LBE600-3 S11

KOMFORT_EC_LBE_v1(3)_EN.indd   25

11.08.2015   9:01:23

Summary of Contents for KOMFORT EC LB S11



























Reviews:

No comments

Brands by name

Popular brands

Load more brands