24
www.blaubergventilatoren.de
KOMFORT EC DW
Function
Indication
16 Control Panel Temperature Sensor Correction
To correct the panel temperature sensor indications select
TEMPERATURE
CORRECTION
submenu from the Engineering menu and
press
ENTER
.
Then use the
or
buttons to set the temperature correction
for the room temperature sensor installed in the control panel casing.
The default factory setting for the temperature sensor correction is -6°C.
To return to the Engineering menu without saving changes press
EXIT
.
17 Default Settings
To reset the controller settings to the factory defaults select
DEFAULT
SETTINGS
submenu from the Engineering menu and press
ENTER
.
To confirm the reset press
ENTER
.
To return to the
Engineering menu
without saving changes press
EXIT
.
The default settings are given in Table 8.
18 Current Temperature Review
To review the current temperatures select the
CURRENT TEMPERATURES
submenu from the
Engineering menu
and press
ENTER
.
The display shows all the current temperature information.
If any temperature sensor of the ventilation unit is missing its
configuration value is displayed as
OFF
.
To return to the Engineering menu press
EXIT
.
19 AUTO Mode (Scheduled Operation)
The AUTO mode enables scheduled operation of the ventilation unit. The
unit runs at the pre-set speed and temperature during the specified time
periods. The unit is in the
Standby mode
between the operating periods.
To activate the
AUTO
mode press
AUTO
. in the control panel
Main menu. Activation of the
AUTO
mode is confirmed with a tick —
.
Table 6. Operation and parameter setup of the unit (continued)
KOMFORT EC DW v1(6)_EN.indd 24
10.08.2015 10:11:13
