background image

DESIGNATION KEY

Air handling unit

1 pc.

User's manual 

1 pc.

Control panel (only for units with S11 and S14 automation) 

1 pc.

Mounting box for wall flush mounting (only for units with S14 automation) 

1 pc.

Mounting box for wall surface mounting (only for units with S14 automation) 

1 pc.

Fastening kit 

1 pc.

Packing box 

1 pc.

KOMFORT EC D B X

L S14

Control

S11/S14/S21

Service side

L - left service side 
R - right service side 

Rated air flow [m

3

/h]

Additional components

B – bypass

Spigot orientation

D – suspended mounting, horizontal spigot 
orientation

Motor type

EC – electronically commutated

Unit type

www.blaubergventilatoren.de

KoMFort ec dB 160/250/350 

5

PURPOSE

The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls, and other utility 
and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered stream 
of intake air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces with 
high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient premises. 
The unit is a component part and is not designed for stand-alone operation. 
It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, 
coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, 
pathogenic germs). 

THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED 

PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT 

THE APPROPRIATE TRAINING. 

THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED 

PERSONNEL AFTER THE APPROPRIATE BRIEFING.

THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED 

ACCESS BY UNATTENDED CHILDREN.

DELIVERY SET

Summary of Contents for KOMFORT EC DB 160

























Reviews: