manualshive.com logo in svg

BLAUBERG FRESHBOX E120, Operation Manual, Page: 13 / 19

Share
Download
BLAUBERG FRESHBOX E120 Operation Manual Download Page 13

www.blaubergventilatoren.de

13

FRESHBOX E120

Function Button/Button 

combination 

Indication

8

Scheduled operation

Each week day has four entries that determine the time for switching the unit to a set fan speed as well as the time for the heater activation or deactivation. 
The timer function always prevails over scheduled operation function. By default the scheduled operation is set for the warm season and the heater is 
disabled. While adjusting the scheduled operation for the cold season set the heater ON parameter.

Activation of the scheduled operation mode via the control panel. 

press and hold

 

press

Deactivation of the scheduled operation mode via the control panel. 

press and hold

 

press

-

Activation of the scheduled operation mode via the remote control. 

Deactivation of the scheduled operation mode from the remote control. 

-

For access to the scheduled operation mode settings turn the unit off  by pressing the 
respective button on the control panel or using the remote control. 

 or  

-

Entering the scheduled operation setup mode using the control panel.

Week day 

Time

Entry 

number

Heater operation 

status

Fan speed 

Heater off

Heater on 

press and hold

press

-

Selection of the scheduled operation mode parameters. The set point blinks during 
setup. 

press and hold

press

 or 

-

Setting the required set point. 
Parameters for scheduled operation setup:

• 

Entry number 

- each week day has four entries. 

• 

Week day

 - setting week day.

• 

Heater operation status

 - setting the heater operating status for a current entry. 

• 

Fan speed

 - setting the fan speed for a current entry. 

• 

Time

 - time setting for a current entry.

press

 or 

-

Entry copying for the next day.
ATTENTION! The Sunday parameters may not be copied for Monday.

press and hold

press

 

-

Exiting the scheduled operation setup mode using the control panel or the remote 
control.

 or 

-

Table 2. Unit control and setup (continued)

Week day 

Entry number

1

2

3

4

Start time

Speed 

Heater 

operation 

status 

Start time

Speed 

Heater 

operation 

status 

Start time

Speed 

Heater 

operation 

status й

Start time

Speed 

Heater 

operation 

status 

Mo.

07:00

2

Off 08:00

1

Off 17:00

2

Off 22:00

1

Off 

Tu.

07:00

2

Off 08:00

1

Off 17:00

2

Off 22:00

1

Off 

We.

07:00

2

Off 08:00

1

Off 17:00

2

Off 22:00

1

Off 

Th.

07:00

2

Off 08:00

1

Off 17:00

2

Off 22:00

1

Off 

Fr.

07:00

2

Off 08:00

1

Off 17:00

2

Off 22:00

1

Off 

Sa.

10:00

2

Off 12:00

2

Off 17:00

2

Off 23:00

1

Off 

Su.

10:00

2

Off 12:00

2

Off 17:00

2

Off 23:00

1

Off 

Table 3. Scheduled operation programming example

Summary of Contents for FRESHBOX E120




















Reviews:

No comments