background image

www.blaubergventilatoren.de

Centro-M EC

3

•  Do not change the power cable length 

at your own discretion. Do not bend 
the power cable. Avoid damaging the 
power cable. Do not put any foreign 
objects on the power cable.

•  Unpack the unit with care. 

•  Do not use damaged equipment or 

cables when connecting the unit to 
power mains.

•  Do not operate the unit outside the 

temperature range stated in the user’s 
manual. Do not operate the unit in 
aggressive or explosive environments.

•  Do not touch the unit controls with wet 

hands. Do not carry out the installation 
and maintenance operations with wet 
hands.

•  Do not wash the unit with water. Protect 

the electric parts of the unit against 
ingress of water. 

•  Do not allow children to operate the 

unit.

•  Disconnect the unit from power mains 

prior to any technical  maintenance.

•  Do not allow children to operate the 

unit.

•  When the unit generates unusual 

sounds, odour, or emits smoke, 
disconnect it from power supply and 
contact the Seller

•  Do not open the unit during operation.

•  Do not direct the air flow produced by 

the unit towards open flame or ignition 
sources.

•  Do not block the air duct when the unit 

is switched on.

•  In case of continuous operation of the 

unit, periodically check the security of 
mounting.

•  Do not sit on the unit and avoid placing 

foreign objects on it.

•  Use the unit only for its intended 

purpose.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.

Summary of Contents for Centro-M EC 100

















Reviews: