www.blaubergventilatoren.de
vento ergo a50/85(-1) Pro1
6
VENTILATOR DESIGN
The ventilator consists of an indoor unit with a decorative front panel, a telescopic air duct and an outer ventilation hood. Two filters, two
air flow rectifiers and a ceramic regenerator are installed in the inner duct of the telescopic air duct. The air filters are designed to purify
supply air and prevent foreign object ingress into the heat exchanger and the fan.
The ceramic regenerator utilities extract air heat energy to warm up supply air flow. The cord laid inside the regenerator is designed to
pull the regenerator from the air duct. The heat exchanger is heat insulated with a special insulating material.
The outer ventilation hood is used to prevent direct ingress of water and other objects to the ventilator.
DESIGN AND FUNCTIONING
Mounting plate
A mounting box for
installing the ventilation
unit on the wall and
connecting the ventilator
to power supply.
Ventilator power indicator
Shows operating status of the ventilator.
Filter
Cleans the air flowing through
the ventilator of dust and
foreign objects and prevents
contamination of the
regenerator.
Ceramic regenerator
Utilises extract air heat
energy to warm up
supply air flow.
Outer air duct
Outer part of the
telescopic air duct.
Ventilation unit
Generates air flow by means of
the fan rotation. The ventilation
unit is covered with a
ventilation grille on the inner
wall side to prevent ingress of
foreign objects into the fan.
The ventilation unit is
equipped with automatic
shutters to prevent air
backflow. The air shutters open
during operation of the
ventilator and close when the
unit is turned off.
Inner air duct
Inner part of the
telescopic air duct.
Air flow rectifier
Prevents air
turbulences in the
ventilator.
Infra-red receiver and light sensor
Responds to signals from the remote control
and detects illumination level to activate/deactivate
the night mode.
Openings for the humidity sensor
Provide contact of air with the humidity sensor that
controls indoor humidity level.
Filter replacement indicator
Indicates the need to replace the filter.
