www.blaubergventilatoren.de
S14/S15
6
CONTROL
The unit is operated from the wall-mounted control panel by using the touch buttons.
The activated button is highlighted.
The signal from the control panel is sent to the control unit and the unit starts operation with a set operation mode.
WARNING!
The control panel must be fi xed on a surface in operational position!
The control panel should be connected to a power supply only when all of the following conditions have been met:
•
the panel casing is mounted on the work surface
•
all necessary connections have been carried out
•
the sensor display is fi xed to the casing
Initialization of the control panel followed by triple blinking of all the buttons will occur after connection to a power supply.
WARNING!
•
Do not switch the buttons on the unsecured panel to avoid false speed switching!
•
Pressing the buttons quickly and shortly may result in malfunction of the unit!
•
Try to practise a fi rm press on the interface buttons with your fi nger cushion as the touch-sensitive panel is less sensitive compared
to a typical mobile phone or tablet screen.
•
Press the button precisely in the desired sector of the control panel to switch the speed.
Operation using software
CAUTION!
Setting, troubleshooting and upgrading of the software version is made by the service technician.
To work with the pre-installed software connect the unit to a laptop or to a PC via a USB cable with the Type A and Type В contact sockets.
The USB cable is not included in the delivery set.
USB Type B
USB Type A
The software enables editing the unit parameters:
Parameter
Factory setting
Control range
Zero speed (the unit is off ) [%]
0
0 - 100
Low speed [%]
40
0 - 100
Medium speed [%]
70
0 - 100
High speed [%]
100
0 - 100
Unit speed when the dry contact of the external control unit is
closed [%]
100
0 - 100
Filter cleaning (replacement) interval [h]
2160 (3 months)
0 - 10000
Humidity level [%]
60
30 - 80
T
he list of the adjustable parameters can be expanded in new versions of the software.
Setting, troubleshooting and upgrading of the software version is made by the service technician.
To download the software follow the link
https://blaubergventilatoren.de/en/download
.
Select the document type “Software” and then using the search bar fi nd the software for the automation S14/S15 . Download the software
fi le.