BLAUBERG Ventilatoren S14 User Manual Download Page 3

www.blaubergventilatoren.de

S14/S15

3

• 

Do not allow children to operate the unit.

• 

Disconnect the unit from power mains prior 
to any technical  maintenance.

•  Do not store any explosive or highly 

fl ammable substances in close proximity to 
the unit.

•  When the unit generates unusual sounds, 

odour, or emits smoke, disconnect it from 
power supply and contact the Seller.

• 

Do not open the unit during operation.

•  Do not direct the air fl ow produced by the 

unit towards open fl ame or ignition sources.

•  Do not block the air duct when the unit is 

switched on.

•  In case of continuous operation of the unit, 

periodically check the security of mounting.

•  Do not sit on the unit and avoid placing 

foreign objects on it.

• 

Use the unit only for its intended purpose.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.

PURPOSE

DELIVERY SET

NAME

NUMBER

Control panel

1 pc.

Mounting box for wall surface mounting

1 pc.

Mounting box for wall fl ush mounting

1 pc.

User’s manual

1 pc.

Packing

1 pc.

The wall control panel with a sensor display is designed for controlling industrial and domestic supply and exhaust ventilation units as 
well as other air handling units. 

THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED 

PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT THE APPROPRIATE 

TRAINING. THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY 

QUALIFIED PERSONNEL AFTER THE APPROPRIATE BRIEFING.

THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED 

ACCESS BY UNATTENDED CHILDREN.

The control panel is not designed for standalone operation.
It is rated for continuous operation.

Summary of Contents for S14









Reviews: