4
www.blaubergventilatoren.de
Iso-K
DELIVERY SET
fan - 1 item;
operation manual - 1 item.
FAN DESIGN
Fig. 1. Iso-K fan design
Centrifugal impeller
Exhaust spigot
Terminal box
Electric motor
Casing
Vibration isolator
Supporting mounting frame
The steel is made of galvanized steel and is internally filled with 50 mm
thermal- and sound-insulating layer made of non-flammable mineral wool.
The fan casing is installed on a supporting mounting frame with integrated
vibration isolators.
The swivel motor-impeller block is attached to the swivel door which
facilitates the fan servicing.
The fan is equipped with a single- or three-speed motor with short circuit
rotor and a centrifugal impeller with forward curved blades.
The impeller is made of galvanized steel.
The motor is equipped with ball bearings for longer service life and a
dynamically balanced turbine.
F class motor winding insulation and IP 54 ingress protection rating.
Overheating protection by built-in thermal switches with leads for
connection to external protection devices.
Smooth or step-up speed control with an auto transformer or frequency
inverter. Both available upon separate order.
Mounting to the wall is performed with the mounting angle bracket KS-ISK
(available upon separate order).
ATTENTION
Make sure the fan has no visible transport damages and check the ordered and the delivered goods for compliance.
Iso-K_v.1(2)-EN.indd 4
10.08.2015 15:21:00
