12
4.4
Manual moving of the machine
The machine can be moved around manually on 3 wheels.
Lay the machine backwards on the handle and flip the bracket with the castor front wheel down.
Make sure the 2 locking pins are locked into place (1 on the left and 1 on the right side of the bracket).
The traction wheels must be disconnected from the drive motors: pull out the locking pin of each rear
wheel. The machine can now be pushed around on its wheels.
WARNING! Always make sure all rotating parts have come to a complete standstill before moving the
machine around.
Be careful! Make sure nobodies feet can get under the wheels. Wear appropriate safety shoes when
you drive the machine to or from the work area.
Locking pin (2x)
