Operating Instructions
BG-250G11/G13
Initial Operation
November 2004
© Copyright Blastrac
29
Revision (A) 12-23-04
5.1 Preparation for initial operation
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual as well as the Honda Engine
Manual.
;
Put the grinding machine and the filter unit on the surface to be
treated.
;
In the case you have not yet installed any diamond grinding disc, you
have to install it now. Please
read chapter 7 "Maintenance
” of this
manual.
;
Check fuel level. See Honda Operating Manual for fuelling guidelines.
;
For 13HP version, be sure battery is in good condition and battery
terminals are clean and tight. Loose cables prevent a fire hazard.
;
Check the dust hose for damages
;
Connect the grinding machine and the filter unit with the dust hose.
Use hose clamps at the connections.
;
Make
sure
the dust bin of the filter unit is empty.
Any machine, if not used according to regulations, may be
hazardous for operating, setting up and servicing. The
operator/owner is responsible for compliance with the safety
regulations during operation and maintenance of safety devices
supplied with the machine as well as the provision of appropriate
additional safety devises.