Operating Instructions
BG-250G11/G13
General
November 2004
© Copyright Blastrac
20
Revision (A) 12-23-04
Starting/Stopping
Fig. 3.3
1
Pull Start (G11)
2
Electric Start (G13)
3
Emergency stop switch
4
Throttle Control
Pull Start (G11)
See “Handgrip and Jack Stand Operating Lever” and make sure the diamond disc
is off the ground and the machine is secure before starting. Push the throttle
control forward all the way to engage the engine choke. With one hand on the
machine, pull the starting chord to start the engine. The engine will need to remain
in the choke condition until it warms up. See the Honda Operating Manual for
details concerning the operation of the Honda engine.
Electric Start (G13)
See “Handgrip and Jack Stand Operating Lever” and make sure the diamond disc
is off the ground and the machine is secure before starting. Push the throttle
control forward all the way to engage the engine choke. Turn the key to start and
hold to engage the electric start. Do not hold for more than three seconds while
attempting to start. Holding on the start for long periods of time will damage the
starter and drain the battery. See Honda Operating Manual for details concerning
the operation of the Honda engine.
1
3
4
2