background image

 

 

 

Safety regulations 

 

The following sticker is placed on the machine. 

 

 

 

 
 

 

 

 

Meanings of these symbols are: 

 

Ear protection is obliged 

 

Safety glasses with lateral protection are obliged 

 

CE-mark on this machine 

 

Safety shoes obliged 

 

Consult the manual before operating the machine 

 

 

Personnel must tie back long hair and not wear loose clothing or jewellery including rings. 
 

Wear gloves and dust mask during operating the machine. 

 

Persons who are not operating the machine must not be permitted to stay in the surrounding area of 
the machine. 

 

Don’t change anything on the machine. Use always cables which are approved and safety earthed 

(extend) cables. The machine is always equipped with an earthed connection, do not change this and 

use always earthed cables with an earthed plug. 

 

Connect the main power supply cable to an installation with an earth leakage circuit breaker. 

 

Inspect and test the electrical components regularly. The electrical components have to satisfy to the 

requirements which apply to these components. 

 

Always call a skilled electrician or your distributor when you have questions about the safety of the 

electrical components. 

 

Work on electrical equipment or operating materials may only be undertaken by a skilled electrician or 
by trained persons under the guidance and supervision of a skilled electrician as well as in accordance 

with the electrical engineering regulations. 

 

Pull out the main plug during inspections and repair operations on the machine. 

 

Never operate the machine when the surface is wet. 

 

Never use the machine in the rain. 

 

Summary of Contents for BDC-655













Reviews: