background image

 

Warranty Registration Notification

IMPORTANT!

TO THE DELIVERING DISTRIBUTOR OR END USER

    

To ensure the proper warranty coverage is extended to the owner of this machine, fill 

in the necessary information below 

COMPLETELY

 and 

ACCURATELY

 and retain for 

your records. 

Go to www.blastrac.com and register online.

 Click on the Register icon 

in the left column of the homepage, and fill out the product registration form with the 

same information that will be recorded here.

 

The warranty period will start upon the delivery date of the machine.

    

The distributor or the end user must provide the machine warranty information when 

the machine is delivered. Registration of the machine will extend the warranty period 

from the recorded delivery date entered with product registration. 

Failure to comply 

will make any and all warranties on the equipment void after 6 months.

OWNER/END USER’S REFERENCE INFORMATION

Delivery  Date _________________________ 
Delivering  Distributor’s  Name  and  Address
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________

Signature of Delivering Distributor’s Representative

Warranty Registration

   

IMPORTANT!

 

To ensure that your Blastrac

®

 machine is covered under warranty, please provide 

the information recorded here by registering online at blastrac.com, or complete this page and fax 

to 866-485-1046, or if you prefer, detach and mail to: 

Blastrac, 13201 North Santa Fe Avenue, Oklahoma City, OK  73114-9901 

(Please print legibly)

Company  _____________________________________________________________________ 
Address  ______________________________________________________________________
City, State, & Zip _______________________________________________________________
Telephone No._____________________ Contact Person ______________________________
Date of Purchase___________________  Date Received ______________________________ 
Machine Model No. __________________________  Serial No. _________________________
Distributor Name _______________________________________________________________
End  User  Name  _______________________________________________________________
End  User  E-mail  _______________________________________________________________

Machine Model No._____________________
Machine Serial No. _____________________
Modifications__________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________

Blastrac is a registered trademark of Blastrac,NA

  

Fold and Detach Here if Mailing

Summary of Contents for BDC-44

















Reviews: