18
Screws, bolts etc. that have been removed must be replaced with those of the same quality, strength, material
and design.
Secure the maintenance area if necessary.
6.1
Changing the liners
Loosen the press bolt of the top liner and remove the cover ( 9 ).
Loosen the nuts of the side liners and plenum liners. Take them out at the bottom of the housing.
To mount the liners, keep on the following sequence:
First place the plenum liners and fix them with
the nuts. (4 + 5 )
Place the side liners inside the housing. ( 3 + 2 )
The sideliners may stick out the body for max. 1mm.
Tighten the nuts.
Place the top liner ( 6 ) in the housing and make sure
that the top liner sits close to the edges of the side
liners.
Place the cover and tighten the bolts.
Tighten the pressure bolt of the top liner slightly and press
the top liner against the side liners.
6. Top liner
3. Side liner LH
2. Side liner RH
5. Plenum side liner
5. Plenum side liner
4. Plenum bottom liner
