OPERATION
Little Blaster™ CARTRIDGE DUST COLLECTOR (cont’d)
3.
To clean cartridge: Turn Dust
Collector switch off. Grasp lift handle
and raise up and down vigorously
allowing the top housing to thump on
the body lip. Do this repeatedly, until
loose dust on the cartridge falls off
into the dust sump. This should be
done every 30 minutes of blasting, or
each time before use. It is a good
idea occasionally to remove motor
housing and with
10-15 PSI
of airline
pressure from air nozzle, blow the
cartridge pleats clean.
4.
After thumping the cartridge, the drain
cap should be removed and the
dust
emptied
from dust collector sump into a
box, bag or container, for ease of
disposing.
Maintained properly, you will enjoy the performance of this reliable type dust collector.
Lift
Handle
Top
Housing
Body
Lip
Cartridge
Drain Cap
© 2020 Hess & Associates
Man. # 561 v02-02 8/2020
Page 13
Summary of Contents for LB4024
Page 21: ...Little Blaster LIGHT BOX ASSEMBLY PARTS 2020 Hess Associates Man 561 v02 02 8 2020 Page 19 ...
Page 22: ...Little Blaster MACHINE AIR CONTROLS PARTS 2020 Hess Associates Man 561 v02 02 8 2020 Page 20 ...
Page 25: ...Little Blaster Electrical Diagram 2020 Hess Associates Man 561 v02 02 8 2020 Page 23 ...
