manualshive.com logo in svg

Blankom PALIOS-IPM4 5105.10, Operating Instructions Manual

Share
Download
Blankom PALIOS-IPM4 5105.10 Operating Instructions Manual Download Page 11

11

PALIOS-IPM4

Part N

o

: 5105.10

8-fold IP-/ ASI-TV Modulator

IP/ SFP/ ASI (H.264/ AVC, MPEG2) 

→

 ATV (8x AM)

9.2.3 Menu ”Program”

This is menu for the program selection of the output channels. The current channel allocation of the PALIOS-IPM4 module is listed. 

The following settings per channel are available: 

• column 

Input 

 

Select the transponder

• column 

Program 

 

 

Select the preferred program. If the program is available in multiple languages, specify language and  

 

 

 

subtitle in the next two colums.

• column 

Output frequency

  Set the channel for the selected program 

Double allocation of the eight output channels is checked automatically. Use the check box “RF“ to set the RF output to “

on

“ or “

off

“. 

9.2.4 Menu ”Settings”

Each channel can be adjusted to your individual requirements. The channels is selected by either clicking left in the navigation tree or 

by clicking on the tabs above the setup tables.

Expert settings

Summary of Contents for PALIOS-IPM4 5105.10


























Reviews:

No comments

Brands by name

Popular brands

Load more brands