User Manual & Datasheet
BLANKOM-HDC-6012_Manual_EN-RR-06-2021_V1.5.docx
10
HDC 6012
be sure to enter as "." instead of a komma ","
The limit from low to high band is: 11700MHz, so all frequencies above need to set the high band LNB IF
of 10600 MHz and the 22KHz need to be switched on.
Finally we have all tuners configured and running:
Setting up incoming IP-Streams:
We have some streams connected to the same switch from another source as MPTS and some as SPTS
so we need to change to TS Config.
We recommend to use at least Layer 2+ Switches which support IGMP V2 (IGMP snooping is not
enough). We made the best experiences with HP Procurve like 2530 24G or 48G – but the newest
firmware must not be the best – so try and error if you use IPTV.
