Page - 14 -
BLANKOM HDC-6008CI EN 2017 V1.1, RR, 12-2017
HDC 6008CI
Actually we do no NIT creation at all: That should be done at the end when all QAM channels are ready. But we
like to pass all necessary information from SAT IN to QAM out. To just remark these both Tables has PID-No.:
EIT:
PID 0x0012hex
TDT/TOT:
PID 0x0014hex and can be added to the mux from its source stream later like:
Now, in QAM
Mux –mode
CH2 output, the EIT + TDT TOT should be inserted.
We might be able to check this by using the
IP stream
output:
