Page - 12 -
BLANKOM HDC-6008CI EN 2017 V1.1, RR, 12-2017
HDC 6008CI
Now we have several methods to create the QAM outputs either as pass-through or
multiplex mode:
In passthrough the NIT which is carried by the SAT-Tuner and maybe be carried by the IP
Input as well would also be passed to the output but is probably the wrong one for a CATV
network. So this method is not recommended or the input chosen is an IP stream MPTS
which doesn’t contain one and the NIT will be passed by another channel for the receivers in
the cable network.
In MuX mode you can select any pre-configured Inpuits stream from Tuner 1...8 and IP IN
and create your individual QAM-TS output. Advantage: You can add single PID’s from the
sources but the EIT = EPG Information cannot be created by this device: EIT remultiplexing
isn’t supported.
Passthrough:
we use tuner 2 Input as example:
Before we need to know whats all coming in by Stream-Expert from another parallel source
using a DekTec Fantasi with the software StreamExpert (we arer selling DekTec if you wish):
