DRP 393 MPEG-4 Receiver/Decoder
Rev. L
www.blankom-digital.de
Page 9 (36)
Description of menu
The main menu items can be selected with the navigation wheel. By pressing the wheel, the user navigates
to the sub-menus, which are selected in the same manner. The configurations can only be changed in the
configuration mode (select “CFG” and press the wheel for at least 3s).
Main Menu
Sub-menu
Parameter
Description
Input
DVB-S/DVB-S2
Status
Frequency
Configuration satellite IF frequency
Symbol rate
Configuration symbol rate
DVB-S Mode
Configuration
DVB-S/DVB-S2 receiving mode
DVB-S
Receive
only DVB-S signals
DVB-S2
Receive
only DVB-S2 signals
Automatic
Automatic identification of DVB-S and DVB-S2 sig
nals
LNB Voltage
(only at 75 Ohm)
Configuration
LNB voltage (selection sat. polarization)
OFF
LNB Power off
13V
Polarization vertical
18V
Polarization horizontal
LNB 22 kHz Tone
(only at 75 Ohm)
Configuration
22KHz tone (selection low/high-band)
OFF
low band
ON
high band
SCPC Mode
ON/OFF
Configuration of transport stream ID for SCPC signals
Decoder
Under preparation
Audio
Under preparation
Video
Under preparation
Logbook
Events
Display of all 256 logbook entries
Erase
Erase all logbook entries
System
Reset/Preset
Reset:
Restart with stored parameters
Preset:
Attention: Preset resets the IP addresses
LAN
default:
192.168.0.202
Version
Display of the device type, SW versions and serial no.
Date/Time
Configuration date and time
LCD Contrast
Configuration contrast of display
Common Interface
Top Slot
Display CA module informationen
Bottom Slot
LAN
Control
IP address
(192.168.000.202)
Subnet mask
(255.255.255.000)
Gateway address
(192.168.000.001)
MAC address
Display
Data
(Option)
