GmbH
a
b
ANTENNENTECHNIK
3 Options for Date & Time configuration via the Headend Controller HCB 100.
- Time can be configured manually, synchronised with the PC/Laptop-time or adopted from an
digital converter
Manual correction of Date/Time
- Press “Transmit” for acceptance/storage
Synchronization of Date/Time with connected PC/Laptop
- Press “Transmit” to Confirm accept PC-Time ”
Select address of a module to adopt its time
(Can be done with all headend modules)
[-/- = die Adressauswahl erfolgt automatisch]
- Press “Transmit” for acceptance
Offset time, for time correction of desired/selected address
Aktualization/Update of Date/Time for displayed module
Overview of all modules which provide Date & Time.
The reference address can be selected directly in this window
NOTICE!
Display of the date for digital Transmodulators possible only from
sofware-version V1.68 of the MPEG-Module.
3.4.5
Adjustment of Date/Time
3.4.6 Cold start of single modules
Entry of the sytstem cold start time (e.G. 03:00 hrs.)
(
when entering 00:00 hrs.)
Cold start is deactivated
“Time alignment”*
ON ... “Time aligment” will be done after restart of the module
OFF ... No “Time aligment” after restart of the module
Matrix for all available modules
- Selection of the module for restart
- Select “All” (all modules will be considered)
- “Delete” module-selection will be relocated and restart configurations
- Manual restart of selected/modules
- “Transmit” for acceptance of cold start configurations
* Die Zeitaktualisierung erfolgt bei aktivierten Neustart auch wenn für kein Modul ein Neustart vereinbart wurde.
20
Hermann - Petersilge - Straße 1
D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 74 1 / 60 - 0
Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·
Germany
