GmbH
a
b
ANTENNENTECHNIK
Further information for timer configuration
RF - Signal:
This parameter is only available at the 1. selection box.
Not all modules support this configuration.
This can be done only if the respective module supprt switching/selection
of the RF-signal (see page 18)
Übernahme:
This function is only available at the 8. selection box
The adjustments of the input parameters will be overtaken without a reset
(see tabel page 20).
1. selection box
8. selection box
Example for an Einstellbox (Address,
Switchtime, Parameter, Werte)
Parameter-List
Color bar:
TV-picture with
Farbbalken ON
When color bar is ON then and datas will be sent to the module then the Farbbalken
will be switched off
Following configurations have to be done.
18
Hermann - Petersilge - Straße 1
D-07422 Bad Blankenburg
Phone: ++ 49 (0) 36 74 1 / 60 - 0
Telefax: ++ 49 (0) 36 74 1 / 60 - 100
www.blankom.de
BLANKOM Antennentechnik GmbH
·
·
·
Germany
