8
A-PALIOS-IPM4
Part N
o
: 5105.82
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
ATV (8x AM)
A
LINE
A transparent LED symbol means that the channel is not configured yet, or the RF output is turned off. Status information about the
system is mirrored in the same way. In this case too an orange colored LED symbol displays an error state during which a green LED
symbol displays error-free working condition. The detailed status information is available by clicking the name field.
The last displayed point indicates the connection status between the network interface and the device. Green means, that the connec-
tion is established. A transparent LED light indicates that there is no connection or the connection is failed.
Settings with the selection box or input fields are taken over by pressing the “send“ button and stored permanently, and the
A-PALIOS-IPM4 is set on these values after a restart too. Settings with the check box are usually performed immediately but not stored
in memory, so they would be lost on a possible restart of the device. To save these settings the “send“ button must be pressed.
In all menus, the language selection is possible between German and English top right.
7.2.1 Menu ”Overview”
This page provides a status overview of the 8 channels. If a channel is working without errors, “SYNC“ is displayed. If errors occur you
will see an “Error“ display. If the RF power is switched off the display “Off“ appears behind the respective channel.
In addition, below the status window the head end display is visible. There all A-LINE-SBL and SBL devices are listed, which are in the
same network and which have been associated with the head end in the “Setup“ menu (see 7.2.6). This is significant because func-
tions over all devices such as the NIT processing between devices of the A-QAMOS and QAMOS device group can be extended to all
components of the head end. The individual components of a head end are listed with their IP address, which is also provided with
a link to this address, so you can switch easily to the next device. If no head end was configured, a “Search“ button appears, which
forwards to the “Setup“ menu and scans the network for other A-LINE-SBL and SBL devices. Then all available devices are listed and
can be selected and added to the head end.
By clicking the “Logout“ button the user logs out of the device and the login window appears. By pressing the “Standby“ button the
device is switched to standby, which is indicated by an amber POWER LED on the device. The “Standby“ button will be replaced by a
“ON“ button, and by pressing this the device will be switched back on.