6
A-PALIOS-IPM4
Part N
o
: 5105.82
8 pole IP-/ ASI-TV Modulator
IP/ SFP/ ASI (H.264/ AVC, MPEG2)
→
ATV (8x AM)
A
LINE
7. Adjusting by web server
7.1 Network connection to the computer
System requirements:
- PC/ laptop with 10/ 100 Mbit Ethernet interface
- Internet browser (e.g. Windows Internet Explorer), which accept JAVA script.
Setup the connection:
The A-PALIOS-IPM4 has to be connected to PC network using an Ethernet cable. The IP address of the device is 192.168.1.100 on
delivery. If several devices should be controlled or adjusted via an Ethernet switch, each device must first be configured
individually
to its provided IP address within the network. To do so the address of the network port on the PC (temporary) must be adapted to the
IP address of the device (subnet mask: 255.255.255.0, IP address: 192.168.1.XXX, where XXX is not the same as the corresponding
value of the device IP address).
After the network configuration of the device(s) the IP address of the control PC is converted to the provided IP address and the
devices can be accessed through the browser with their new IP addresses. The user must authenticate himself with his credentials
(user name and password), if the password and user testing were activated on the setup page (see chapter 7.2.6):
After successful registration or successful connection establishment without password (default setting) the start page of the device is
the menu “Overview“ (see chapter 7.2.1).
