Blanco FD9045WX, Instructions For The Use And Care And Installation, Page: 10 / 32

ELECTRICAL CONNECTION
The appliance is fitted with an Australian approved 15 Amp flexible cord and plug
which must be connected to a correctly earthed socket outlet.
The manufacturer is not liable for any direct or indirect damage caused by faulty
installation or connection. It is therefore necessary that all installation and connec-
tion operations are carried out by qualified personnel complying with the local and
general regulations in force.
CONNECTION OF THE FEEDING CABLE TO THE MAINS
Connect the feeding cable to a plug suitable for the load indicated on the rating plate
of the product. In case of a direct connection to the mains (cable without plug), it is
necessary to insert a suitable omnipolar switch before the appliance, with minimum
opening between contacts of 3 mm (the grounding wire should not be interrupted by
the switch).
Before connecting to the mains, make sure that:
• The electrical counter, the safety valve, the feeding line and the socket are ade-
quate to withstand the maximum load required (see rating plate).
• The supply system is regularly grounded, according to the regulations in force.
• The socket or the omnipolar switch can easily be reached
after the installation of the oven
• After carrying out the connection to the mains, check that the
supplying cable does not come into contact with parts
subject to heating.
• Never use reductions, shunts, adaptors which can cause
overheating or burning.
The manufacturer is not liable for any direct or indirect
damage caused by faulty installation or connection. It is therefore necessary
that all installation and connection operations are carried out by qualified per-
sonnel complying with the local and general regulations in force.
Instructions for Installation
Electrical features
Oven light 2x25 W
Upper heating element 1100 W
Bottom heating element 1500 W
Grill heating element 2600 W
Circular heating element 2600 W
10