9
FIG. 1
FIG. 2
CLEANING
CAUTION:
always disconnect the appliance from the gas
and electricity mains before carrying out any
cleaning operation.
2) WORKTOP
If you wish to maintain the shine of the glass, it is
important to clean the hob every time you use it with
lukewarm soapy water, rinsed and dried.
The enamelled grids, enamelled burner caps “C”,
and burner heads “M” (see fig. 1) must also be
washed and the ignition elements “AC” and flame
sensors “TC” (see fig. 2) must be cleaned. Do not
wash them in the dishwasher.
Cleaning operations must be carried out when the
hob and components are not hot and the use of
metal scouring pads, powder abrasives and
corrosive sprays must be avoided.
Do not allow vinegar, coffee, milk, salt water, lemon
juice or tomato juice to remain in prolonged contact
with the surfaces.
WARNINGS:
when reassembling the components, observe
the following recommendations:
- check that the holes in the burner heads “M”
(fig. 1) are not blocked by foreign bodies.
- Ensure that the enamelled covers “C”
(fig. 1) are correctly positioned on the burner
head. The covers are correctly positioned on
the head when they are perfectly stable.
- Do not use steam jets to clean the appliance.
- To prevent difficulties with lighting, regularly
clean the ignition elements (ceramic and
electrode) and flame sensors.
