14
3.2
Washing programs
The dishwasher is equipped with a control panel an and 3-FIGURE
DISPLAY (12), “section 3.1” described in chapter "3. Description of the
controls", from which it is possible to carry out all the power switch-on,
switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
AUTOMATIC OPENING DOOR
This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. Once the door has opened, the end of
the wash cycle is indicated by a short beep.
This option only works on 2 programs i.e daily half load wash and Auto
Programs and extends the cycle time.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.
