Blanco BIC603S, Use And Care And Installation Manual

Page: 10 / 20

Caution:
if you are using a pan with a diameter which is more than 40% smaller than the printing marked on
the glass, the cooking zone may not be activated.
1.3 Cooking vessels (Fig.6A):
Cooking by induction uses magnetism to generate heat. The vessels must therefore contain iron.
Check if the vessel material is magnetic using a magnet.
Important:
To prevent permanent damage to the cooker surface, do not use:
- Pans with bases that are not perfectly flat.
- Metal pans with enamelled bases.
- Do not use pans with rough bases as they may scratch the hob’s surface.
Before connecting the appliance to the electricity supply:
- Check that the voltage and power values listed on the data plate (positioned on the lower part of the appli -
ance) are compatible with the electricity supply and socket. If you have any doubts, please consult a qualified
electrician for assistance.
Important
- metal objects such as knives, forks, spoons or lids must not be placed on the cooker surface as they can get
hot.
- after use, switch the cooker off using the control device and do not rely on the pan detector.
- avoid liquid spilling, therefore to boil or heat liquids reduce the heat supply.
- do not leave the heating elements switched on with empty vessels or without vessels.
- when you have finished cooking, switch off the relative resistance using the control indicated below.
- never use aluminium foil for cooking, or never place products wrapped in aluminium foil onto the cooking
surface. The aluminium would melt and damage your apparatus irreversibly.
- Never heat a tin or can of food without opening it – it could explode! This warning applies to hobs of all types.
Attention: steam cleaners must not be used.
Attention: if the surface is cracked, switch the ap paratus off to prevent electric shocks.
Attention: the appliance is not intended to be operated by means of external timer or separated remote-
control system.
Other Information:
This appliance conforms to the European Directive EC/2002/96, Waste Electrical and Electronic Equipment (WEEE).
By making sure that this appliance is disposed of in a suitable manner, the user is helping to prevent potential
damage to the environment or to public health.
The symbol on the product or on the packaging label on the carton indicates that the appliance should not
be treated as domestic waste, but should be delivered to a suitable electric and electronic appliance recycling
collection point. Follow local guidelines when disposing of waste. For more information on the treatment,
re-use and recycling of this product, please contact your local authority or domestic waste collection service.
INSTALLATION INSTRUCTIONS
These instructions address specialised installers and serve as a guide for installation, adjustment and mainte -
nance in conformity with the laws and regulations in force.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result
in electrical hazards (see technical data if supplied).
Positioning (Fig.5):
The appliance is made for fixing into a worktop, as shown in the relevant figure. Apply the supplied sealant to
the entire perimeter of the hob and insert it into the fitment hole (for sizing see Fig.5B). Fix the appliance into
the worktop with the 4 stays, rotating them according to the top’s depth (Fig.5A).
If the underside of the appliance will be accessible after installation, a separator panel G (Fig.8A) will need to
be mounted maintaining the distances shown (Fig.8B).
If the appliance is installed over an oven the panel is not necessary (Fig.9A-9B).
- 10 -