5
Installation
Water Outlet Hose
The water drain hose can be connected either directly to the water
drain hole or to the sink outlet spigot. Using a special bent pipe (if
available), the water can be drained directly into the sink via hooking
the bent pipe over the edge of the sink. This connection should be at a
minimum of 50 cm and at a maximum of 110 cm from the floor plane.
Warning
: When a drain hose longer than 4 m is used, the dishes might remain dirty.
Electrical Connection
The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and
current. If there is no earth connection, have a competent electrician carry out an earthing installation. In the
case of usage without proper earthing, Blanco will not be responsible for damage that might occur.
The indoor fuse current value should be 10-16 A.
Your machine is set according to 220-240 V.
The machine should not be plugged in during positioning.
Always use the coated plug supplied with your machine.
Running in low voltage will cause a decline in washing quality.
The machine’s electrical cable should be replaced by an authorised service or an authorised electrician only.
Failure to do so may lead to accidents and/or damage.
In order not to cause an electric shock, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the plug. Never pull the cord
itself.
The power plug shall be accessible after installation.